Baja Designs is excited to offer Fog Pocket Kits for the 2014-2018 Mercedes Sprinter Van. Choose between the road-legal Squadron SAE Fog Pocket Kit or our high-performance Squadron Sport and Pro models—perfect for enhancing visibility during off-road adventures. Each kit includes your choice of clear or Baja Amber lights, custom-fit mounting brackets, CAN-bus wiring harness adaptors, and all necessary hardware for a seamless installation. Enjoy peace of mind with our 30-Day Satisfaction Guarantee and Lifetime Limited Warranty, ensuring the best in quality and protection. Squadron SAE Fog Pocket Kit for Mercedes Sprinter Van 2014-2018 The Squadron SAE Fog Pocket LED Light Kit for the 2014-2018 Mercedes Sprinter Van is the ultimate road-legal auxiliary fog light. It allows van enthusiasts to retain their vehicle's factory fit and finish while enhancing visibility and safety on the road. Whether you're driving through town or setting off on your next adventure, the Squadron SAE kit is designed to perform. Engineered to integrate seamlessly with the vehicle’s CANbus system, this kit features our next-generation Squadron SAE lights. These lights are equipped with all-new aspheric projector optics and advanced LED technology, delivering a precise and controlled light pattern with a sharp cutoff to illuminate Zone 1 effectively. This makes the Squadron SAE perfect for navigating dust, fog, or inclement weather. Choose between a clear lens or Baja Amber option to reduce glare and minimize reflections in challenging conditions. With a 56% increase in luminous flux compared to our previous generation, the Squadron SAE produces 2,420 raw lumens per light, with an output reaching 15,800 candela—all at just 29 watts. Fully compliant with SAE J583 fog lamp standards, this kit is road-legal while delivering performance-grade lighting and reliability. SHOP Squadron Sport Fog Pocket Kit for Mercedes Sprinter Van 2014-2018 Squadron Sport Fog Pocket LED off-road light kit for the 2014-2018 Mercedes Sprinter empowers enthusiasts to explore off-road, day or night. With 3,165 raw lumens per light, this kit dramatically enhances visibility in adverse conditions like dust, rain, fog, or mist—helping you spot potential hazards more easily for safer navigation. Designed to seamlessly integrate with the vehicle’s CANbus system, the kit features a wide-angle lens pattern that illuminates Zones 1 and 2, providing a broader light spread and improving situational awareness on the trails. Choose between the clear lens option for daylight-like clarity or the Baja Amber lens to reduce glare and minimize reflections in dust and fog. SHOP Squadron Pro Fog Pocket Kit for Mercedes Sprinter Van 2014-2018 The Squadron Pro Fog Pocket LED off-road light kit for the 2014-2018 Mercedes Sprinter gives enthusiasts the more intensity and the freedom to explore off-road, day or night. Producing 4,095 raw lumens per light, the Squadron Pro provides exceptional visibility in adverse conditions like dust, rain, fog, or mist—helping you spot potential hazards more clearly for safer navigation. Engineered to integrate seamlessly with the vehicle’s CANbus system, this kit is equipped with a wide-angle lens pattern that illuminates Zones 1 and 2, creating a broader light spread for enhanced situational awareness on the trails. Choose between the clear lens for daylight-like visibility or the Baja Amber lens to reduce glare and minimize reflections in challenging conditions. SHOP

Learn All About Our LP Series At Baja Designs, we design all our lighting solutions with one goal in mind - win races. When we achieve this goal, we know we’ve designed a product that we are proud to introduce to the general market. When engineering the LP Series we used the research and development from all current and past Baja Designs lights, with the intention of building the highest performing all-in-one offroad light ever seen. Watch the all-new LP Series video for a glimpse into the technology, features, and performance of the Scientists of Lighting’s flagship powerhouse: https://youtu.be/LYj8Bmyd8Wo?si=j1dyJYVyUCzJ83Vs Unique Design – The unique Baja Designs futuristic styling through 3D light face with flat and sloping surfaces blended to the case offers the LP9, LP6 and LP4 a characteristic unlike any other light on the market today. Direct Ducted Cooling (DDC) – With so much power, a cooling system was an integral part of making the LP series perform at the highest lever. Direct Ducted Cooling, or DDC has been designed in all of the LP series lights for exceptional heat dispersion. This acts as channels, allowing air to travel from the front of the housing to the rear heat sinks keeping the lights from overheating while in use. Integrated Peripheral Technology (IPT) – One of the features that makes the LP series the best on the trail is Integrated Peripheral Technology, or IPT for short. The IPTs allows the LP series to provide an incredible 200-degree spread of usable light, combining forward and cornering light in an all-in-one package. Color Backlight Options – Our LP Pro series models offer color backlight options. Choose from amber, red, green, or blue giving enthusiasts the choice to customize their vehicles for shows, photo shoots, or anywhere they want to bring attention. uService Lens Replacement – Keeping the LP series running at the highest level means having a lens that is free of damage. All LP series lights have been designed with Baja Designs uService technology. Changing a damaged lens and customizing your light pattern is made easy as unscrewing the housing bolts in the back and installing a new lens. All this can be done in your garage or on the trail without the fear of voiding your Lifetime limited warranty. The LP9, LP6, and LP4 from Baja Designs are the ultimate off-road lighting solutions for those seeking a powerful, all-in-one package. With features like Direct Ducted Cooling, Integrated Peripheral Technology that provides a 200-degree spread of usable LED light, uService® technology, and customizable colored backlighting, these lights enhance both safety and enjoyment during night driving. Ideal for any vehicle—from Jeeps and trucks to motorcycles, UTVs, adventure vans, and more—these lights are designed to meet customer needs whether their conquering the Baja 1000 or exploring remote backcountry. Equip vehicles with a Baja Designs lighting package and ensure their next adventure is well-lit and unforgettable. SHOP NOW LP9 Pro The King of lights, the LP9 Pro utilizes a collection nine forward projecting next-generation LEDs, plus three  Integrated Peripheral Technology (IPT) LEDs per side to provide 200-degrees spread of light. The LP9 Pro is the light of choice when looking for near and mid field lighting providing intense illumination in zones 1-3 while pushing into zone 4 spot and zone 5 racer spot for when the speeds increase. Added features include the availability of amber, red, blue or green backlight and Hi/Low functionality. LP9 Pro Specs: 12,547 Total Raw Lumens 124W/9A SHOP NOW LP9 Sport: Get lit with the LP9 Sport. Perfect for enthusiasts on a budget that want a high-power full-size light without the added features. The LP9 Sport offers a 200-degree spread of light while illuminating zones 1-3, a simple easy to use on/off and no backlight for those that are looking at no-nonsense performance without the Pro price. LP9 Sport Specs: 9,421 Total Raw Lumens 88W/6.4A SHOP NOW LP9 Racer The LP9 Racer is designed for the demands of high-speed driving. While still producing a 200-degrees spread of light, the high power of the LP9 Racer Edition produces a much tighter pattern into zones 4 and 5 providing higher visibility when the speed climbs towards triple digits. Available with amber backlight, and Hi/Low functionality. LP9 Racer Edition Specs: 8,374 Total Raw Lumens 132W/9.6A SHOP NOW LP6 Pro A powerhouse light all-in-one package, the LP6 Pro utilizes a collection of six next-generation LEDs for forward illumination, plus two IPT LEDs on each side to provide 200-degree spread of light, illuminating zones 1-4 while also offering zone 5 racer spot light. Available with your choice of amber, red, blue or green backlight and Hi/Low functionality. LP6 Pro Specs: 11,225 Total Raw Lumens 103w/7.5A SHOP NOW LP4 Pro For those with an adventurous spirit that are short on space, the LP4 Pro utilizes 4 forward projecting next-generation LEDs plus 2 IPT LEDs per side to provide 200 degrees spread of light that offers lighting in zones 1-3 along with zone 4. Available with your choice of amber, red, blue or green backlight. LP4 Pro Specs: 8,857 Total Raw Lumens 75.9W/5.5A

Baja Designs is thrilled to introduce Baja Amber S2 Sport fog pocket kits for the current line-up of Toyota trucks and SUVs, including the 2022+ Tundra, 2023+ Sequoia and 2024+ Tacoma. These kits are an ideal choice for those that are driving through the challenging of conditions. Whether you're navigating through dust, rain, snow or fog, the Baja Amber lens is designed to minimize glare and enhance visibility. The superior technology significantly improves driving experiences, providing unparalleled clarity and safety.  SHOP NOW

XL80 vs LP4 which is right for your application? Over the last few years both of these two lights have been at the forefront of LED off-road lighting, offering the highest level of performance while on the trails. While both offer superior performance, the question that always gets asked is which is better, the XL80 or the LP4?  Let's dive into these two lights to see what their differences are and answer any questions you have and which one will be the best for your application. ORDER NOW XL80 SPECS Raw Lumens: 9,022 Watts/Amps: 75.9W/5.5A Dimmable Feature (20%) IP69K (Waterproof up to 9ft & Pressure Washable) Exceeds MIL-STD810G (Mil-Spec Testing)  IK10 Compliant (Mechanical Impact Testing) ELS: XL80 (Driving Combo) 62⁰/ 5.0/ 392'/ 8278 Learn more about ELS Originally released in 2015, the XL80 has provided offroad enthusiasts with intense and bold illumination while being able to provide an iconic look. The XL80 LED light boosts an impressive 9,022 total raw lumens per light rated at 5.5 amps. This allows the XL80 to have a more intense illumination through lighting zones 1-4.  Some highlighted features are powerful LEDs for heightened visibility, amplifying brightness, and introducing versatility to any lighting configuration. It also comes equipped with a high/low functionality, with the low dimmed 20 percent for adjustable lighting. Always working to improve our lights, the latest model of the XL80 has since been updated in 2022 with next generation LED technology that provides 18% greater distance and intensity over the original model.  Durability is always a priority as powder-coating the housing and anodizing the bezel allows our lights to withstand the harsh elements they encounter. ORDER NOW LP4 SPECS Total Raw Lumens: 8,857 IPT Raw Lumens: 1,972 Watts/Amps: 75.9W/5.5A Direct Ducted Cooling (DDC) Multiple color backlights available (Amber, Red, Blue, Green) IP69K (Waterproof up to 9ft & Pressure Washable) Exceeds MIL-STD810G (Mil-Spec Testing)  IK10 Compliant (Mechanical Impact Testing) ELS: LP4 (Driving Combo) 136⁰/7.5/395'/6686 Learn more about ELS Released in 2020, the LP4 Pro provides enthusiasts with a bold and modern look illuminating zones 1-4 and reaching into zone 5. The combination of next-generation LEDs provides an impressive 8,857 total raw lumens per light rated each at 5.5 Amps. While the LP4 does not come equip with a high/low feature like the XL80, it does come with our Integrated Peripheral Technology (IPT) LEDs which give 200 degrees spread of light and Directed Ducted Cooling (DDC) which allows airflow to travel through the light for improved cooling and performance. The light comes with Baja Designs' iconic amber backlight and is also available in red, blue, and green. The full powder-coated housing of the LP4 gives it a sleek and modern look. When placing the LP4 in the A-Piller or ditch light configuration, we recommend our IPT reflector covers to avoid glare running into the cabin. The IPTs of the LP4 have been designed to provide up to 200 degrees of spreadable light, and this additional spread of light spills onto the hood and reflects into the cab creating a ‘glaring’ effect on drivers. We have solved this issue for those who choose to mount the LP4 Pro in the a-pillar configuration with our IPT covers mounted to block the inner IPT, preventing glare inside the cab and hood allowing enthusiasts to utilize the LP4 glare-free. To read our blog about why we recommend the IPT blocker when using the LP4 as an a-pillar light HERE. While both lights have different features they also have a lot of features that are the same. While the XL80 and LP4 use different LEDs, they use the same reflectors for increased distance and performance.  Changing a damaged lens and customizing your light pattern on both the XL80 and the LP4 Pro is made easy with our patented uService technology. Which one is for you? So in conclusion, which one is better depends on what enthusiasts are looking for in a lighting package. Do you need the extra intensity or the extra peripheral lighting?  While both the XL80 and the LP4 have been the most compared light in our lineup, they both offer a similar performance while offering their own unique features and look. Regardless of which solution you plan on going with both lighting solutions have been proven in the world's toughest environment and tested in some of the biggest stages in the world, including the Baja 1000. We have been creating top-tier light solutions for over years 30 years so rest a sure whichever light you go with we have you covered. Do you have questions that we can help with? Reach out to our customer service department at info@bajadesigns.com

You Asked, We Listened At Baja Designs, we are committed to delivering the highest quality products for enthusiasts of all levels. Whether racing through the desert or driving down a snowy road at night, we offer the perfect lighting solutions for your needs. Baja Designs, the Scientists of Lighting, is proud to announce the introduction of our “Factory Amber Lens Replacement Kits.” These kits are tailored for those who favor the darker amber temperature during low-visibility driving conditions, while seamlessly complementing the hue of your OEM running lights. The true amber color of the lenses is best utilized in snowy, low-visibility conditions and increases depth perception. Each Factory Amber lens kit includes a high-quality O-ring, providing exceptional protection against moisture and dust intrusion, just like our current lens options. Factory Amber vs. Baja Amber (which one is right for you?) Factory Amber: This replacement lens option is crafted to match the OEM running lights found on vehicles today seamlessly. Factory Amber provides a color temperature best utilized in low-visibility conditions to increase depth perception while minimizing glare. Factory Amber light output. Baja Amber: This performance-driven lens is specifically designed for off-road driving in challenging conditions such as dust, rain, snow, or fog. The Baja Amber lens minimizes glare, enhancing visibility and significantly improving your driving experience. Baja Amber light output SHOP LENS KITS Don’t know where to start? Let our trained customer service team help guide you into the right lighting kit for your application. For the ultimate in purchase protection, all Baja Designs lights are backed by our 30-day Satisfaction Guarantee and Lifetime limited warranty giving you piece of mind. To start your light kit today, visit www.bajadesigns.com.

Baja Designs, the Scientists of Lighting, introduces bull bar light kits for the 2023-on Ford F250/350 Super Duty trucks. Designed to complement the aggressive, no-nonsense styling of these work trucks, our Bull bar has been specifically engineered around the 2023-on Ford Super Duty, giving enthusiasts the perfect provision to add performance lighting solutions to their vehicle.Enthusiasts can choose from our popular XL Series or our LP4, LP6,and LP9 options. All kits include the necessary hardware and wiring to make installation quick and easy. Backed by our 30-Day Satisfaction Guarantee and Lifetime Limited Warranty for the ultimate in-purchase protection. Choose from our standard toggle harness or upfitter harness that allows users to wire into the stock Upfitter switches. Choose from the following light options: (x6) XL Sport - (3,162 raw lumens ea./ 30W/2.2A) (x6) XL Pro - (4,095 raw lumens ea./ 41W/3A) (x6) XL80 - (9,022 raw lumens ea./ 75W/5.5A) (x6) LP4 Pro - (8857 total raw lumens ea./ 75.9W/5.5A) (x5) LP6 Pro - (11,225 total raw lumens ea./ 103W/7.5A) (x4) LP9 Pro – (12,547 raw lumens ea. /124W/9A) All Kits will come with: Bull Bar Wiring Harnesses All necessary mounting hardware SHOP NOW Don’t know where to start? Let our trained customer service team help guide you into the right lighting kit for your application.  For the ultimate in purchase protection, all Baja Designs lights are backed by our 30-day Satisfaction Guarantee and Lifetime limited warranty giving you piece of mind. 

Baja Designs, The Scientists of Lighting is proud to announce lighting solutions for the 2024 Toyota Tacoma. Offering enthusiasts a collection of light kits tailored for the trail, such as A-Pillar kits, XL Linkable Roof Bar Kit, S2 Reverse Kit and S2 fog pocket kits. All kits will come with the necessary hardware for a quick and clean installation. Backed by our 30-Day Satisfaction Guarantee and Lifetime Limited Warranty for the ultimate in purchase protection.  A-Pillar KitsThe Baja Designs A-Pillar LED light kits for the 2024 Toyota Tacoma are for enthusiasts who need more visibility at night while on the trails. This comprehensive two-light kit has been expertly designed with a set of lights that complement the lines of the new Tacoma. Mounting brackets, toggle harness and all essential components come standard in the kit, ensuring a seamless installation process. A-Pillar LED Lights improve visibility, safety, and off-road capability offering enthusiasts additional illumination and expanded field of view that helps see hazards or obstacles while on the trail. SHOP A-PIllars XL Linkable Roof Bar KitThe Baja Designs 8XL Linkable Roof Bar Kit for the 2024 Toyota Tacoma has been designed for all outdoor enthusiasts who want a powerful lighting setup. If you are just taking it easy down a dirt road with your camper on the back or driving at high speeds through rutted roads, this roof kit has been developed and tested for you. Utilizing our 8XL Linkable this kit produces 25,296 total raw lumens of forward projected light that has a smooth blend due to the use of our spot, driving combo and wide cornering lenses illuminating zones 1, 2, 3 and 4 simultaneously. The XL Linkable system provides 45 degrees of vertical pitch adjustment within each light or the entire unit. Completely independent horizontal adjustment per light allows for straight or arc configurations to perfectly match the lines of your Toyota Tacoma.  This kit comes with everything you need to hit the trail, with wiring fully crimped and trimmed allowing for an easy installation process.  SHOP 8XL LInkable Roof Bar Kit S2 Reverse KitThe Baja Designs S2 Sport Reverse Kit for the 2024 Toyota Tacoma will Illuminate the area behind your vehicle, ensuring your safety with precision and reliability. This kit features two S2 Sport LED lights, each providing 1,581 raw lumens each and mounted underneath the rear bumper for optimal illumination. Built to withstand any challenge, the compact yet powerful S2 lights are designed to handle whatever you throw at them. Additionally, the S2 reverse kit can serve as a dust light, further enhancing visibility in adverse conditions. An option for a toggle switch, or our plug-n-play trailer harness, installation is worry-free and straightforward.  SHOP S2 Reverse Kit 2024 Toyota Tacoma Upfitter Harness The Baja Designs upfitter harness for the 2024 Toyota Tacoma will allow enthusiasts to wire into the OEM auxiliary switches. This is the perfect solution for those that want a clean look while utilizing the stock switches to control your accessories.This harness can support up to three (3) Baja Designs lighting kits. SHOP Upfitter Harness S2 and S2 SAE Fog Pocket Replacement KitsThe Baja Designs S2 Sport and S2 SAE Fog light replacement kit for the 2024 Toyota Tacoma has been designed to replace your factory fog lights while maintaining the OEM fit and finish. This premium LED lighting kit comes in two configurations: four S2 Sports offering 1,581 raw lumens each or four S2 SAE road legal fog lights designed to meet SAE j583 requirements producing 1,210 raw lumens each. The kit includes mounting brackets, mounting hardware, and splitter harnesses that allow the use of the stock switch.  SHOP Fog Pocket Replacement Kits

Baja Designs, the Scientists of Lighting, is proud to announce for the first-time bolt on bumper LED Light kits for the Can-Am Maverick R UTVs. With two different styles to choose from, a full-size pre-runner bumper and a smaller push bar bumper, these kits have been designed to complement the aggressive styling of the Maverick R while providing an exceptional mounting point for Baja Designs lighting. With two bumper options, enthusiasts can choose from six different light kits to match their style and desired performance, from the Squadron Sport triple light kit to XL Pro, XL80, LP4 or LP6 dual light kits, to an OnX6+ 10” light bar kit. Each kit comes with all the necessary hardware for a clean installation, so you can hit the trails quickly. All kits are backed by our 30-day Satisfaction Guarantee and Lifetime limited warranty for the ultimate in purchase protection. With over 30 years of lighting experience, Baja Designs is once again leading the field with lighting solutions for Can-Am Maverick R side x side enthusiasts. Take your UTV to the next level by adding a Bumper LED light kit to light up your adventure. Pre-Runner Bumper Kits: For those looking for a race inspired bumper, the Baja Designs Pre-Runner Bumper and LED Light Kits for the Can-Am Maverick R provides protection while offering an exceptional mounting solution for Baja Designs lighting, such as the Squadron series, XL series, and LP series lights. The pre-runner bumper is the perfect race inspired bumper while providing that extra layer of protection for the Can-Am Maverick R UTV. All kits are backed by our 30-day Satisfaction Guarantee and Lifetime limited warranty for the ultimate in purchase protection. Choose from the following light options: (x3) Squadron Sport - Driving Combo Clear (3,162 raw lumens ea.) (x2) XL Pro - Driving Combo Clear (4,095 raw lumens ea.) (x2) XL80 - Driving Combo Clear (9,022 raw lumens ea.) (x2) LP4 Pro Driving Combo Clear (8857 total raw lumens ea.) (x2) LP6 Pro - Driving Combo Clear (11,225 total raw lumens ea.) (x1) OnX6+ 10" - Driving Combo Clear (10,817 raw lumens ea.) All Kits will come comes with: Pre-Runner Bumper Wiring Harnesses All necessary mounting hardware SHOP NOW Push-Bar Bumper Kits: The Push Bar for the 2024 Can-Am Maverick R UTV features a sleeker design while still offering the same LED Light Kits as the Pre-Runner Bumper. It is slimmed down without sacrificing crucial front-end protection. Engineered for rough terrain, this minimalistic Push Bar kit offers a secure mounting solution for lights and vehicle protection. With hassle-free bolt-on installation and included hardware, achieving a perfect fit is effortless. Choose from the following light options: (x3) Squadron Sport - Driving Combo Clear (3,162 raw lumens ea.) (x2) XL Pro - Driving Combo Clear (4,095 raw lumens ea.) (x2) XL80 - Driving Combo Clear (9,022 raw lumens ea.) (x2) LP4 Pro Driving Combo Clear (8857 total raw lumens ea.) (x2) LP6 Pro - Driving Combo Clear (11,225 total raw lumens ea.) (x1) OnX6+ 10" - Driving Combo Clear (10,817 raw lumens ea.) All Kits will come comes with: Push-Bar Bumper Wiring Harnesses All necessary mounting hardware SHOP NOW Let Us Help You Don't know where to start? Let our trained customer service team help guide you into the right lighting kit for your application.  For the ultimate in purchase protection, all Baja Designs lights are backed by our 30-day Satisfaction Guarantee and Lifetime limited warranty giving you piece of mind.

One of the most unique builds we have seen comes from South Carolina and Carlos Chavira, or otherwise known as @agiywithajeep.  Starting life as a 2009 Jeep JKU as a stock 4-door wrangler, it has morphed into one of the craziest Jeeps on the trails today.Let’s take a dive into what makes Carlos’ Jeep worthy enough to have been one of our 2024 Jeep Beach booth vehicles.“The Jeep started life as a stock 4 door wrangler. We got right into it with a Sawzall and created a two door flatbed conversion to stand out from the rest,” explains Carlos. This created the unique signature look that Carlos was going for with his build.  Once he created his single cab, he then built up the frame for the flatbed and fabricated it all in his garage. The Jeep sits on 42-inch Mickey Thompson Baja Boss tires on 17-inch Dirty Life Roadkill beadlocks. To turn this beast, the front axle is a Kingpin Dana 60 and the rear is a GM 14-bolt. Both axles are geared to 5.13 with Yukon Grizzly lockers.  Nemesis front fenders keep debris from flying up, while TNT aluminum belly skit plates protect down below. Under the hood Carlos decided to go big as in a 6.0 LS Swap with a stage 2 BTR cam with a Holley mid-rise ram intake and terminator X Max EFI , mated to a 4L80E Automatic transmission. His Baja Designs light package is extensive. Up front he chose a pair of LP9 Pros, and an OnX6+ 20-inch light bar mounted to a VKS front frame chop bumper. Looking lower we see S2 Pros on the steering knuckle providing light down low where his wheels are pointing. An 8XL Linkable light bar using our JK vehicle-specific roof mounts is installed to the roof of the cab and an RTL serving as a chase light is mounted to the rear of the cab.  Clear rock lights are mounted within the wheel wells finishing off the overall lighting package. Powering all of his auxiliary lighting in an sPOD BantamX power management system paired to a touchscreen controller in the cab. Not only is the sPOD powering his lighting, but it is also powering his Holley EFI system.  Carlos controls his Jeep from custom PRP seat covers and rocks out with a full Boss Audio system. Carlos explains of his build, “There isn’t much actual “Jeep” left to the rig, as it slowly turns into a dedicated rock crawler.” While Carlos is still adding to his Jeep, there's no doubt that he has built a one-of-a-kind rock crawler that is truly his. Be sure to follow Carlos on Instagram @aguywithajeep or visit his website at aguywithajeep.com to follow what he does next to his Jeep build.  Products used on @aguywithajeep JKU build: LP9 Pro LED Auxiliary Light Pod Universal Starting At:$617.95 A design that was inspired by Baja Designs legendary 8 inch La Paz HID; The LP9 features modern styling and performance, with some of the most... OnX6+ Straight LED Light Bar Universal Starting At:$442.95 The Baja Designs OnX6+ LED light bar is the pinnacle of off-road lighting. Integrating our trademarked high-speed spot reflectors along with... S2 Pro Black LED Auxiliary Light Pod Pair Universal Starting At:$350.95 Two is always better than one, right? We think so, which is why we’re offering a pair of S2 Pro LED auxiliary lights with wiring harness. The... Jeep JK XL Linkable Roof Mount Light Kit Jeep 2007-18 Wrangler JK $2,271.95 Full adjustment, Total Performance. The 8 XL Linkable kit for the Jeep Wrangler JK 2007-2018 is for the enthusiast looking to take charge with... RTL LED Rear Light Bar Universal $489.95 Improve safety during your off-road adventures or races with the Baja Designs RTL, or Rear Tail Light, offering enhanced visibility at the rear... BantamX Touchscreen Jeep 2007-2018 Wrangler JK $930.00 **Please expect a 2-4 week lead time on product**The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable)... LED Rock Light Kit Universal $344.95 Our Universal Rock Light Kit takes the guess work out of buying wiring and trying to figure out how to pin relays. All of the lengths are pre-cut...

Baja Designs, the Scientists of Lighting, is proud to announce new lighting kits for the 2024 KTM and Husqvarna off-road dirt bikes. These headlight replacement kits are the perfect upgrade to elevate your night riding. We have partnered with Motominded to provide a series of headlight replacement kits that are designed to provide a significant amount of vertical and horizontal spread for the ultimate trail coverage. This race quality light replaces the stock headlight and along with a new connector makes this LED light kit truly “plug-and-play”, improving daytime safety as well as nighttime visibility. We have packaged this light kit with everything you need to install quickly, even including an additional lens to customize your light pattern for your riding style thanks to our uService technology. Backed by our 30-day satisfaction guarantee and Limited Lifetime Warranty for the ultimate in purchase protection. 2024 KTM and Husqvarna Light Kits Baja Designs offers multiple light kits for the 2024 KTM and the 2024 Husqvarna off-road models. These kits are truly "plug-and-play" with the included wiring harnesses. For those looking to upgrade the stock headlight, the XL Pro headlight replacement kit is ready to elevate those nighttime rides.  With two available light options, the XL80 offering 9,022 raw lumens, or the XL Pro which has 4,095 raw lumens to light the trail. KTM: XL Pro Compatible models: EXC-F, XCF-W, XW-F, XC-W XL80 Compatible models: EXC-F, XCF-W, XW-F Husqvarna:XP Pro Compatible models: FE-S, FE-W, FE, TEXL80 Compatible models: FE-S, FE, FE-W XL Pro Specs:  - Raw Lumens: 4,095 - 41.4W/3A - Includes pre-installed spot lens, additional driving combo lens XL80 Specs: - Raw Lumens: 9,022 - 75.9W/5.5A - Includes pre-installed driving combo lens, additional spot lens Additional Options: Choose the standard replacement light kit, or either the light with a hi-low harness or a dimmer harness for full control of the light for riding on and off the road.  Hi/Lo Harness: For those looking to utilize the hi/lo functionality of their stock system, we have a light package that includes the  Hi/Lo harness that plugs in-line between the light and the stock harness. This allows the use of the OEM hi/lo switch, dimming the light by 20 percent. Dimmer Switch: The dimmer switch allows riders to 'dial' in the amount of brightness of the light. The dimmer at full brightness is at 100%, with dimmable ranges between 95% - 30% power output. Perfect for those that need the most output control of the light on the bike. With over 30 years of lighting experience, Baja Designs is once again leading the field with lighting solutions that fit every type of rider.  Take your 2024 KTM and Husqvarna offroad motorcycles to the next level by replacing the stock light with a one of replacement headlight kits that will make night riding safer and more enjoyable at higher speeds. 2024 KTM/Husqvarna Motorcycle Light Kits   KTM XL Pro (D/C) Headlight Kit KTM 2024 350 EXC-F,500 EXC-F, 450 XCF-W, 350 XW-F, 500 XW-F, 150 XC-W, 250 XC-W, 300 XC-W $425.00 The Baja Designs XL Pro LED headlight replacement kit for the 2024 KTM off-road motorcycles is the perfect upgrade to elevate your night riding....   KTM XL Pro (D/C) Headlight Kit /w Hi-Low Harness KTM 2024 350 EXC-F,500 EXC-F, 450 XCF-W, 350 XW-F, 500 XW-F, 150 XC-W, 250 XC-W, 300 XC-W $470.95 The Baja Designs XL Pro LED headlight replacement kit with Hi/Low harness for the 2024 KTM dual sport motorcycles is the perfect upgrade to elevate...   KTM XL Pro (D/C) Headlight Kit /w Dimmer KTM 2024 350 EXC-F,500 EXC-F, 450 XCF-W, 350 XW-F, 500 XW-F, 150 XC-W, 250 XC-W, 300 XC-W $500.00 The Baja Designs XL Pro LED headlight replacement kit with dimmer for the 2024 KTM off-road motorcycles is the perfect upgrade to elevate your...   KTM XL80 (D/C) Headlight Kit KTM 2024 350 EXC-F,500 EXC-F, 450 XCF-W, 350 XW-F, 500 XW-F $475.00 The Baja Designs XL80 LED headlight replacement kit for the 2024 KTM off-road motorcycles is the perfect upgrade to elevate your night riding....   KTM XL80 (D/C) Headlight Kit /w Hi-Low Harness KTM 2024 350 EXC-F,500 EXC-F, 450 XCF-W, 350 XW-F, 500 XW-F $520.95 The Baja Designs XL80 LED headlight replacement kit with Hi/Low harness for the 2024 KTM dual sport motorcycles is the perfect upgrade to elevate...   KTM XL80 (D/C) Headlight Kit /w Dimmer KTM 2024 350 EXC-F,500 EXC-F, 450 XCF-W, 350 XW-F, 500 XW-F $550.00 The Baja Designs XL80 LED headlight replacement kit with dimmer for the 2024 KTM off-road motorcycles is the perfect upgrade to elevate your...   Husqvarna XL Pro (D/C) Headlight Kit w/ Dimmer Husqvarna 2024 FE 350S, FE 501S, FE350W, FE 501W, FE 450, TE 150, TE 250, TE 300 $500.00 The Baja Designs XL Pro LED headlight replacement kit with dimmer for the 2024 Husqvarna off-road motorcycles is the perfect upgrade to elevate...   Husqvarna XL Pro (D/C) Headlight Kit w/ Hi-Low Harness Husqvarna 2024 FE 350S, FE 501S, FE350W, FE 501W, FE 450, TE 150, TE 250, TE 300 $470.95 The Baja Designs XL Pro LED headlight replacement kit with Hi/Low harness for the 2024 Husqvarna dual sport motorcycles is the perfect upgrade...   Husqvarna XL Pro (D/C) Headlight Kit Husqvarna 2024 FE 350S, FE 501S, FE350W, FE 501W, FE 450, TE 150, TE 250, TE 300 $425.00 The Baja Designs XL Pro LED headlight replacement kit for the 2024 Husqvarna off-road motorcycles is the perfect upgrade to elevate your night...   Husqvarna XL80 (D/C) Headlight Kit w/ Dimmer Husqvarna 2024 FE 350S, FE 501S, FE350W, FE 501W, FE 450 $550.00 The Baja Designs XL80 LED headlight replacement kit with dimmer for the 2024 Husqvarna off-road motorcycles is the perfect upgrade to elevate...   Husqvarna XL80 (D/C) Headlight Kit Husqvarna 2024 FE 350S, FE 501S, FE350W, FE 501W, FE 450 $475.00 The Baja Designs XL80 LED headlight replacement kit for the 2024 Husqvarna off-road motorcycles is the perfect upgrade to elevate your night...   Husqvarna XL80 (D/C) Headlight Kit Husqvarna 2024 FE 350S, FE 501S, FE350W, FE 501W, FE 450 $475.00 The Baja Designs XL80 LED headlight replacement kit for the 2024 Husqvarna off-road motorcycles is the perfect upgrade to elevate your night...   KTM/Husqvarna XL Hi/Low Harness KTM 2024 350 EXC-F,500 EXC-F, Husqvarna 2024 FE 350S, FE 501S $45.95 The Baja Designs Hi/Low harness for the 2024 KTM/Husqvarna dual sport motorcycles plugs in-line between the XL Pro or XL80 replacement light...

Baja Designs, the Scientists of Lighting, is raising the bar with full adjustment and total performance in the XL Linkable LED Light bar. Designed by enthusiasts for enthusiasts, the XL Linkable offers complete adjustability without sacrificing performance. Unlike conventional one-piece light bars with limited vertical adjustability, the Baja Design XL Linkable provides enhanced versatility with 45 degrees of vertical pitch adjustment within each light or the entire unit. Completely independent horizontal adjustment of 20 degrees per light allows for straight or arc configurations to match the lines of your vehicle perfectly. The XL Linkable incorporates our popular XL Sport light with a distinct difference. Unlike the regular XL housing, it utilizes our moto housing, known for its slim and lightweight design. Each housing is linked individually with our aircraft-rated 6061 extruded aluminum links. We offer the light bar in configurations ranging from 3 to 8 lights. Additionally, we provide individual XL Linkable Light Bar Add-a-Light kits for those needing to expand their setup. This flexibility is made possible by the simple and modular design of the XL Linkable. Superior Performance At Baja Designs, we proudly embrace our slogan 'The Scientists of Lighting.' Committed to excellence, we meticulously test new technologies to maintain our position as the market's premier lighting experts. Continuously striving to innovate, we aim to enhance our circuitry for greater effectiveness while delivering more light to our customers. Our latest XL Sport board, featured on every XL Pod in our Linkable system, is the most efficient and powerful motherboard yet. As of 2022, all XL Sports lights have our updated circuit board for increased performance and output. Our current output for an XL Sport light is 3,162 Lumens, 30.36 Watts, and 2.2 Amps per light. Customizable to Your Application What makes the XL Linkable such a versatile light bar is the ability to customize it to your application. The unique feature of our XL Linkable system provides 45 degrees of vertical pitch adjustment within each light or the entire unit. Completely independent horizontal adjustment of 20 degrees per light allows for straight or arc configurations to perfectly match the lines of your vehicle’s bumper or roofline.  Every XL Linkable is backed by Baja Design’s 30-Day Satisfaction Guarantee and Lifetime Limited Warranty for the ultimate in purchase protection. XL Linkable Features 45-degrees of vertical pitch adjustment within each light or entire unit. 20-degrees of horizontal adjustment per light allows for straight or arc configurations. Offered in multiple configurations, from three to nine individual XL Sport lights Offering 3,162 raw lumens each. Wiring harness included, comes fully crimped and trimmed. Ability to add or replace links to original XL Linkable Bar. Pre-Load Mount Included. Black rock guards included to protect the lights when not in use. XL Linkable Vehicle Specific and Universal Kits Depending on your vehicle, we might offer a tailored kit just for you. Each of our vehicle-specific kits includes an XL Linkable light bar, brackets tailored to your vehicle, rock guards, necessary hardware, harness, pre-load kit, detailed instructions, and a lifetime warranty. If you encounter any challenges during the installation of our kit, our tech team is available to guide you through any questions you may have Need a customized setup for your vehicle? Look no further; we've got you covered. Our Universal XL Linkable package includes the XL Linkable light bar, black rock guards, universal harness, and preload kit. This grants you the flexibility to customize your vehicle according to your preferences while ensuring you have all the essentials for your setup. The XL Linkable is intricately designed to provide the smoothest light blend while driving, ensuring an unmatched behind-the-wheel experience. With its focus on illuminating zones 2, 3, and 4, our light bar delivers optimal brightness and balance. Choosing a Baja Designs solution offers the added advantage of customization, empowering you to tailor the light bar to your specific preferences. Our lights are intentionally designed with uService, enabling easy lens replacement and pattern adjustment without voiding the lifetime warranty. Full Adjustment, Total Performance If you're in search of a versatile light bar with numerous customization possibilities, look no further than the XL Linkable. Whether you have specific preferences or a particular driving style, this solution can be finely tuned to meet your needs. Engineered and rigorously tested by passionate enthusiasts, it guarantees optimal performance and full adjustability in lighting. If you have any inquiries or need assistance from our team, don't hesitate to reach out. We're here to help you create the perfect lighting package tailored just for you. SHOP XL LINKABLE LED LIGHT BAR KITS

When you look at what LED auxiliary lights are popular on vehicles today, there's one set that stands out from the rest, the Baja Designs LP9, LP6 and LP4 series LED lights. These “Do-it-All” auxiliary LED lights providing near, mid-field and distance illumination within zones 1-5, giving enthusiasts 200-degrees spread of usable light. These high-output lights utilize Baja Designs' next-generation LED technology and are perfect for any build or race vehicle needing a light that has both max distance and spread in one. Let's dive into what makes the LP series the most popular auxiliary LED lights in the off-road world.https://youtu.be/LYj8Bmyd8Wo?si=j1dyJYVyUCzJ83Vs Direct Ducted Cooling (DDC) – With so much power, a cooling system was an integral part of making the LP series perform at the highest lever. Direct Ducted Cooling, or DDC has been designed in all of the LP series lights for exceptional heat dispersion. This acts as channels, allowing air to travel from the front of the housing to the rear heat sinks keeping the lights from overheating while in use.  Integrated Peripheral Technology (IPT) – One of the features that makes the LP series the best on the trail is Integrated Peripheral Technology, or IPT for short. The IPTs allows the LP series to provide an incredible 200-degree spread of usable light, combining forward and cornering light in an all-in-one package. uService Lens Replacement – Keeping the LP series running at the highest level means having a lens that is free of damage. All LP series lights have been designed with Baja Designs uService technology. Changing a damaged lens and customizing your light pattern is made easy as unscrewing the housing bolts in the back and installing a new lens. All this can be done in your garage or on the trail without the fear of voiding your Lifetime limited warranty.  Color Backlight Options – Our LP Pro series models offer color backlight options. Choose from amber, red, green, or blue giving enthusiasts the choice to customize their vehicles for shows, photo shoots, or anywhere they want to bring attention. A unique feature of our LP series lights compared to the rest of our auxiliary lighting solutions and any other lights on the market, is the architecture. While it looks different, you can service them just like the rest of our lights.Most of our lights have a thin aluminum bezel, usually machined, the the LP series has a unique flat and sloping bezel, not only for the futuristic styling but also for specific performance characteristics.The unique architecture is because along with a mixture of high performance forward projecting LEDs all the LP lights have our Integrated Peripheral Technology (IPT) which allows for over 200-degree of light spread. LP9 Pro The King of lights, the LP9 Pro utilizes a collection nine forward projecting next-generation LEDs, plus three  Integrated Peripheral Technology (IPT) LEDs per side to provide 200-degrees spread of light. The LP9 Pro is the light of choice when looking for near and mid field lighting providing intense illumination in zones 1-3 while pushing into zone 4 spot and zone 5 racer spot for when the speeds increase. Added features include the availability of amber, red, blue or green backlight and Hi/Low functionality. LP9 Pro Specs: 12,547 Total Raw Lumens 124W/9A Shop LP9 Pro LED Light LP9 Sport:Get lit with the LP9 Sport. Perfect for enthusiasts on a budget that want a high-power full-size light without the added features. The LP9 Sport offers a 200-degree spread of light while illuminating zones 1-3, a simple easy to use on/off and no backlight for those that are looking at no-nonsense performance without the Pro price.LP9 Sport Specs:9,421 Total Raw Lumens88W/6.4A Shop LP9 Sport LED Light LP9 RacerThe LP9 Racer is designed for the demands of high-speed driving. While still producing a 200-degrees spread of light, the high power of the LP9 Racer Edition produces a much tighter pattern into zones 4 and 5 providing higher visibility when the speed climbs towards triple digits. Available with amber backlight, and Hi/Low functionality.LP9 Racer Edition Specs:8,374 Total Raw Lumens132W/9.6A Shop LP9 Racer LED Light LP6 LightsA powerhouse light all-in-one package, the LP6 Pro utilizes a collection of six next-generation LEDs for forward illumination, plus two IPT LEDs on each side to provide 200-degree spread of light, illuminating zones 1-4 while also offering zone 5 racer spot light. Available with your choice of amber, red, blue or green backlight and Hi/Low functionality.LP6 Pro Specs:11,225 Total Raw Lumens103w/7.5A SHOP LP6 Pro LED Lights LP4 Lights For those with an adventurous spirit that are short on space, the LP4 Pro utilizes 4 forward projecting next-generation LEDs plus 2 IPT LEDs per side to provide 200 degrees spread of light that offers lighting in zones 1-3 along with zone 4. Available with your choice of amber, red, blue or green backlight. LP4 Pro Specs: 8,857 Total Raw Lumens 75.9W/5.5A  Shop LP4 Pro LED Lights The LP9, LP6, and the LP4 from Baja Designs are the off-road lighting solution for those who are looking for a powerhouse light all-in-one package. Features such as Direct Ducted Cooling, Integrated Peripheral Technology offering 200 degrees spread of usable LED light, uService technology, and colored backlight options, enthusiasts have a lighting package that will make driving at night safer and more enjoyable. Perfect for any vehicle, including Jeeps, trucks, motorcycles, UTVs, Adventure vans, and any other vehicle that needs additional lighting. From winning the Baja 1000 or exploring the backcountry, don't head out on your next adventure without outfitting your vehicle with a lighting package from Baja Designs.